Na'urar Lakabi ta Wuyan Kwalba ta atomatik ta FK808 Hoton da aka Fito

Injin Lakabi na Wuyan Kwalba ta atomatik na FK808

Takaitaccen Bayani:

Injin lakabin FK808 ya dace da yin lakabin wuyan kwalba. Ana amfani da shi sosai a cikin lakabin wuyan kwalba mai zagaye da mazugi a abinci, kayan kwalliya, yin giya, magani, abin sha, masana'antar sinadarai da sauran masana'antu, kuma yana iya yin lakabin rabin zagaye.

Injin lakabin FK808 za a iya yi masa lakabi ba kawai a wuya ba har ma a jikin kwalbar, kuma yana tabbatar da cewa an yi masa lakabin cikakken kariya daga samfurin, matsayin da aka tsayar na lakabin samfurin, lakabin lakabin biyu, lakabin gaba da baya, kuma ana iya daidaita tazara tsakanin lakabin gaba da baya.

Kayayyakin da suka shafi wasu abubuwa:

Aika mana imel

Cikakken Bayani game da Samfurin

Alamun Samfura

Injin Lakabi na Wuyan Kwalba ta atomatik na FK808

Za ka iya saita kaifi na bidiyo a kusurwar dama ta ƙasan bidiyon

Bayanin Inji

FK808 yana da ƙarin ayyuka don ƙara zaɓuɓɓuka:

① Na'urar kwalba mai juyawa ta atomatik ta zaɓi.

② Ana iya haɗa shi kai tsaye zuwa layin samarwa don cimma kwalba ta atomatik da inganta ingancin samarwa.

③ Injin lambar ribbon na zaɓi zai iya buga ranar samarwa, ranar karewa da kuma jerin samarwa akan layi, wanda ke rage tsarin kwalba kuma yana inganta ingantaccen samarwa sosai.

④ Aikin ciyarwa ta atomatik (haɗe da la'akari da samfur);

⑤ Aikin tattara kayan aiki ta atomatik (haɗe da la'akari da samfur);

⑥ Ƙara sauran na'urar lakabi;

Tsarin Aiki

Ka'idar aiki: Siginar shigarwa daga samfurin Firikwensin da lakabin PLC ne ke sarrafa su, sannan PLC tana fitar da sigina don sarrafa motar jan hankali da bawul ɗin solenoid don fara sanya lakabi.

Tsarin Lakabi: Na'urar raba kwalba → Ana raba kwalaben ɗaya bayan ɗaya don tabbatar da lokacin lakabi ga kowace kwalba → Na'urar firikwensin samfurin tana gano kwalbar → PLC ta karɓi siginar, silinda ta iska ta motsa gaba, fara lakabi → an kammala rufe lakabin, silinda ta iska ta koma baya → bel ɗin jigilar kaya yana aika kwalaben.

Sigogi na Fasaha

Sigogi	Kwanan wata
Bayanin Lakabi	Sitika mai mannewa, mai haske ko mara haske
Juriyar Lakabi	±1mm
Ƙarfin aiki (inji/min)	25~60
Sutsamfuringirma (mm)	φ25mm～φ120mm H:25~150; Ana iya keɓance shi
Girman lakabin sutura (mm)	L:20-380;W(H):20-130
Girman Inji (LWH)	≈195012001450(mm)
Girman Fakitin (LWH)	≈200012501500(mm)
Wutar lantarki	220V/50(60)HZ; Ana iya keɓance shi
Ƙarfi	1050W
NW(KG)	≈230.0
GW(KG)	≈2255.0
Naɗin Lakabi	ID:Ø76mm; OD:≤260mm

Tsarin gini:

A'a.	Tsarin gini	aiki
1	Garkuwar Gefe Biyu	a kiyaye kwalaben a mike, ana iya daidaita su gwargwadon diamita na kwalaben.
2	Shugaban Lakabi	Tushen mai laƙabi, gami da tsarin jujjuyawar lakabi da tsarin tuƙi.
3	Kariyar tabawa	sigogin aiki da saitawa
4	Farantin Tarin	tattara kayayyakin da aka yiwa alama.
5	Silinda Mai Gyara Kwalba	tuƙi na'urar gyara don gyara samfurin yayin yin lakabi
6	Matata	tace ruwa da ƙazanta
7	Akwatin Wutar Lantarki	saitin lantarki
8	Babban Maɓalli	Buɗe injin ɗin
9	Tashar Gaggawa	dakatar da injin idan ya yi kuskure
10	Na'urar Na'urar Rotary	Motar da ke motsawa don juya samfurin yayin da ake yiwa lakabi
11	Farantin Bare Lakabi	alamar cirewa daga takardar sakin
12	Tayar Tazara	yana sa kowane samfura 2 su kiyaye takamaiman nisa
13	Masu daidaitawa	ana amfani da shi don daidaita matsayin lakabi

Bukatun Samar da Lakabi

1. Gibin da ke tsakanin lakabin da lakabin shine 2-3mm;

2. Nisa tsakanin lakabin da gefen takardar ƙasa shine 2mm;

3. An yi takardar ƙasan lakabin da gilashi, wadda take da ƙarfi sosai kuma tana hana ta karyewa (don guje wa yanke takardar ƙasan);

4. Diamita na ciki na tsakiyar shine 76mm, kuma diamita na waje bai wuce 280mm ba, an shirya shi a jere ɗaya.

Ya kamata a haɗa samar da lakabin da ke sama da samfurinka. Don takamaiman buƙatu, da fatan za a duba sakamakon sadarwa da injiniyoyinmu!

Siffofi:

1) Tsarin Kulawa: Tsarin kula da Panasonic na Japan, tare da kwanciyar hankali mai yawa da ƙarancin gazawar aiki.

2) Tsarin Aiki: Allon taɓawa mai launi, hanyar gani kai tsaye tana da sauƙin aiki. Akwai Sinanci da Ingilishi. Sauƙin daidaita duk sigogin lantarki da aikin ƙidaya, wanda ke da amfani ga gudanar da samarwa.

3) Tsarin Ganowa: Amfani da na'urar firikwensin lakabin LEUZE/Italian Datalogic da na'urar firikwensin samfurin Panasonic na Japan, waɗanda ke da sauƙin kamuwa da lakabi da samfur, don haka suna tabbatar da daidaito mai kyau da kuma aikin lakabi mai dorewa. Yana ceton aiki sosai.

4) Aikin Ƙararrawa: Injin zai ba da ƙararrawa idan matsala ta faru, kamar zubewar lakabin, karyewar lakabin, ko wasu matsaloli.

5) Kayan Inji: Injin da sauran kayan suna amfani da ƙarfe mai bakin ƙarfe da kuma ƙarfe mai ƙarfe mai anodized, tare da juriyar tsatsa mai yawa kuma ba ya taɓa tsatsa.

6) Sanya na'urar canza wutar lantarki (voltage transformer) domin ta dace da wutar lantarki ta gida.

Na baya: Na'urar Buga Sukurori ta FK-X601

Na gaba: Injin Cika Ma'aunin Gudun FKF805 Daidaitacce