Lakabin Sanya Kwalba Mai Zagaye/Tape na FK605 na Tebur
Takaitaccen Bayani:
Injin lakabin kwalban FK605 mai zagaye/taper na tebur ya dace da lakabin kwalba mai zagaye da zagaye, bokiti, da gwangwani.
Aiki mai sauƙi, babban samarwa, Injina suna ɗaukar sarari kaɗan, ana iya motsa su cikin sauƙi kuma a ɗauka a kowane lokaci.
Aiki, Kawai danna yanayin atomatik akan allon taɓawa, sannan sanya samfuran akan na'urar jigilar kaya ɗaya bayan ɗaya, za a kammala lakabin.
Ana iya daidaita lakabin lakabin a wani takamaiman matsayi na kwalbar, ana iya cimma cikakken rufe lakabin samfurin, haka kuma ana iya cimma lakabin gaba da baya na samfurin da aikin lakabin lakabi biyu. Ana amfani da shi sosai a cikin marufi, abinci, abin sha, sinadarai na yau da kullun, magani, kayan kwalliya da sauran masana'antu.
Kayayyakin da suka shafi wasu abubuwa:
Lakabin Sanya Kwalba Mai Zagaye/Tape na FK605 na Tebur
Za ka iya saita kaifi na bidiyo a kusurwar dama ta ƙasan bidiyon
| Sigogi | Kwanan wata |
| Bayanin Lakabi | Sitika mai mannewa, mai haske ko mara haske |
| Juriyar Lakabi (mm) | ±1 |
| Ƙarfin aiki (inji/min) | 20 ~ 45 |
| Girman samfurin (mm) | φ25～φ120; H:25~150; Ana iya keɓance shi |
| Girman lakabin sutura (mm) | L:20 ~ 380; W(H):20 ~ 130 |
| Girman Inji (L*W*H)(mm) | ≈1260*970*890 |
| Girman Fakitin (L*W*H)(mm) | ≈1280*1000*920 |
| Wutar lantarki | 220V/50(60)HZ; Ana iya keɓance shi |
| Ƙarfi (W) | 120 |
| NW(KG) | ≈100 |
| GW(KG) | ≈130 |
| Naɗin Lakabi (mm) | ID:＞76; OD:≤260 |
Bukatun Samar da Lakabi
1. Gibin da ke tsakanin lakabin da lakabin shine 2-3mm;
2. Nisa tsakanin lakabin da gefen takardar ƙasa shine 2mm;
3. An yi takardar ƙasan lakabin da gilashi, wadda take da ƙarfi sosai kuma tana hana ta karyewa (don guje wa yanke takardar ƙasan);
4. Diamita na ciki na tsakiyar shine 76mm, kuma diamita na waje bai wuce 280mm ba, an shirya shi a jere ɗaya.
Ya kamata a haɗa samar da lakabin da ke sama da samfurinka. Don takamaiman buƙatu, da fatan za a duba sakamakon sadarwa da injiniyoyinmu!
Tsarin Lakabi:
Sanya kayayyakin a cikin na'urar ciyarwa → Ana watsa samfuran ta hanyar bel ɗin jigilar kaya → Firikwensin samfurin yana gano samfurin → PLC tana karɓar siginar samfurin kuma tana barin alamar aikin injin → silinda ta gyara samfurin da lakabin
Siffofi:
1) Tsarin Kulawa: Tsarin kula da Panasonic na Japan, tare da kwanciyar hankali mai yawa da ƙarancin gazawar aiki.
2) Tsarin Aiki: Allon taɓawa mai launi, hanyar gani kai tsaye tana da sauƙin aiki. Akwai Sinanci da Ingilishi. Sauƙin daidaita duk sigogin lantarki da aikin ƙidaya, wanda ke da amfani ga gudanar da samarwa.
3) Tsarin Ganowa: Amfani da na'urar firikwensin lakabin LEUZE/Italian Datalogic da na'urar firikwensin samfurin Panasonic na Japan, waɗanda ke da sauƙin kamuwa da lakabi da samfur, don haka suna tabbatar da daidaito mai kyau da kuma aikin lakabi mai dorewa. Yana ceton aiki sosai.
4) Aikin Ƙararrawa: Injin zai ba da ƙararrawa idan matsala ta faru, kamar zubewar lakabin, karyewar lakabin, ko wasu matsaloli.
5) Kayan Inji: Injin da sauran kayan suna amfani da ƙarfe mai bakin ƙarfe da kuma ƙarfe mai ƙarfe mai anodized, tare da juriyar tsatsa mai yawa kuma ba ya taɓa tsatsa.
6) Sanya na'urar canza wutar lantarki (voltage transformer) domin ta dace da wutar lantarki ta gida.
