Na'urar Lakabi ta Gefe Biyu ta Atomatik don Allon LED
Shawarar Abokin Ciniki:
Sigogi:
| Sigogi | Bayanai |
| Bayanin Lakabi | sitika mai mannewa, mai haske ko mara haske |
| Juriyar Lakabi | ±1mm |
| Ƙarfin aiki (inji/min) | 40 ~ 120 |
| Girman kwalban kwat (mm) | L:40~400 W:20~200 H:0.2~150; Ana iya keɓance shi |
| Girman lakabin sutura (mm) | L: 15-100; W(H): 15-130 |
| Girman Inji (L*W*H) | ≈1930*695*1390 (mm) |
| Girman Fakitin (L*W*H) | ≈1950*730*1450 (mm) |
| Wutar lantarki | 220V/50(60)HZ; Ana iya keɓance shi |
| Ƙarfi | 1030W |
| NW (KG) | ≈180.0 |
| GW(KG) | ≈330.0 |
| Naɗin Lakabi | ID: Ø76mm;OD:≤260mm |
Tsarin gini:
| A'a. | Tsarin gini | aiki |
| 1 | Na'urar jigilar kaya | samfurin watsawa. |
| 2 | Babban Lakabi | lakabi a saman, tsakiyar mai lakabin, gami da jujjuyawar lakabin da tsarin tuƙi. |
| 3 | Kan Lakabi na Ƙasa | Lakabi a ƙasa, tsakiyar mai lakabi, gami da lakabi mai lakabi da tsarin tuƙi. |
| 4 | Firikwensin Samfura | gano samfurin. |
| 5 | Farantin Bare Lakabi | bare lakabin daga takardar saki. |
| 6 | Goga | santsi saman da aka yiwa alama. |
| 7 | Kariyar tabawa | sigogin aiki da saitawa |
| 8 | Na'urar Ƙarfafawa | Danna samfurin da aka yiwa alama don ƙarfafa lakabin. |
| 9 | Farantin Tarin | tattara kayayyakin da aka yiwa alama. |
| 10 | Akwatin Wutar Lantarki | sanya saitunan lantarki. |
| 11 | Garkuwar Gefe Biyu | kiyaye samfuran suna tafiya daidai, ana iya daidaita su gwargwadon girman samfurin. |
Siffofi:
1) Tsarin Kulawa: Tsarin kula da Panasonic na Japan, tare da kwanciyar hankali mai yawa da ƙarancin gazawar aiki.
2) Tsarin Aiki: Allon taɓawa mai launi, hanyar sadarwa ta gani kai tsaye tana da sauƙin aiki. Akwai Sinanci da Ingilishi. Sauƙin daidaita duk sigogin lantarki da aikin ƙidaya, wanda ke da amfani ga gudanar da samarwa.
3) Tsarin Ganowa: Amfani da na'urar firikwensin lakabin LEUZE/Italiyanci da na'urar firikwensin samfurin Panasonic na Japan, waɗanda ke da sauƙin kamuwa da lakabi da samfur, don haka suna tabbatar da daidaito mai kyau da kuma aikin lakabi mai karko. Yana ceton aiki sosai.
4) Aikin Ƙararrawa: Injin zai ba da ƙararrawa idan matsala ta faru, kamar zubewar lakabin, karyewar lakabin, ko wasu matsaloli.
5) Kayan Inji: Injin da sauran kayan suna amfani da ƙarfe mai bakin ƙarfe da kuma ƙarfe mai ƙarfe mai anodized, tare da juriyar tsatsa mai yawa kuma ba ya taɓa tsatsa.
6) Sanya na'urar canza wutar lantarki (voltage transformer) don daidaitawa da ƙarfin lantarki na gida.