Injin Lakabi na Crayon na atomatik na FK807
Shawarar Abokin Ciniki:
Sigogi:
| Sigogi | Bayanai |
| Bayanin Lakabi | sitika mai mannewa, mai haske ko mara haske |
| Juriyar Lakabi | ±1mm |
| Ƙarfin aiki (inji/min) | 100 ~ 300 |
| Girman kwalban kwat (mm) | Ø10～Ø30; Ana iya keɓance shi |
| Girman lakabin sutura (mm) | L: 20-290; W(H): 20-130 |
| Girman Inji (L*W*H) | ≈2100*720*1450 (mm) |
| Girman Fakitin (L*W*H) | ≈2010*750*1730 (mm) |
| Wutar lantarki | 220V/50(60)HZ; Ana iya keɓance shi |
| Ƙarfi | 700W |
| NW (KG) | ≈185 |
| GW(KG) | ≈356 |
| Naɗin Lakabi | ID: Ø76mm;OD:≤260mm |
Tsarin gini:
| A'a. | Tsarin gini | aiki |
| 1 | Na'urar Ciyarwa | kayayyakin da aka raba da kuma ciyarwa. |
| 2 | Na'urar jigilar kaya | samfurin watsawa. |
| 3 | Garkuwar Gefe Biyu | a kiyaye kwalaben a mike, ana iya daidaita su gwargwadon diamita na kwalaben. |
| 4 | Shugaban Lakabi | Tushen mai laƙabi, gami da tsarin jujjuyawar lakabi da tsarin tuƙi. |
| 5 | Kariyar tabawa | sigogin aiki da saitawa |
| 6 | Belin Mai Juyawa | fitar da samfuran su juya yayin da ake naɗe laƙabi. |
| 7 | Farantin Tarin | tattara kayayyakin da aka yiwa alama. |
| 8 | Akwatin Wutar Lantarki | saitin lantarki |
| 9 | Babban Maɓalli | |
| 10 | Tashar Gaggawa | dakatar da injin idan ya yi kuskure |
| 11 | Masu daidaitawa | ana amfani da shi don daidaita matsayin lakabi |
Siffofi:
1) Tsarin Kulawa: Tsarin kula da Panasonic na Japan, tare da kwanciyar hankali mai yawa da ƙarancin gazawar aiki.
2) Tsarin Aiki: Allon taɓawa mai launi, hanyar sadarwa ta gani kai tsaye tana da sauƙin aiki. Akwai Sinanci da Ingilishi. Sauƙin daidaita duk sigogin lantarki da aikin ƙidaya, wanda ke da amfani ga gudanar da samarwa.
3) Tsarin Ganowa: Amfani da na'urar firikwensin lakabin LEUZE/Italiyanci da na'urar firikwensin samfurin Panasonic na Japan, waɗanda ke da sauƙin kamuwa da lakabi da samfur, don haka suna tabbatar da daidaito mai kyau da kuma aikin lakabi mai karko. Yana ceton aiki sosai.
4) Aikin Ƙararrawa: Injin zai ba da ƙararrawa idan matsala ta faru, kamar zubewar lakabin, karyewar lakabin, ko wasu matsaloli.
5) Kayan Inji: Injin da sauran kayan suna amfani da ƙarfe mai bakin ƙarfe da kuma ƙarfe mai ƙarfe mai anodized, tare da juriyar tsatsa mai yawa kuma ba ya taɓa tsatsa.
6) Sanya na'urar canza wutar lantarki (voltage transformer) don daidaitawa da ƙarfin lantarki na gida.